Wall Cabinet

by Mike Smith

PROJECT: Drop Down Storage cabinet
DESIGN: Taken from WoodSmith Magazine (Issue 169)
MATERIAL: White Pine
FINISH: Rosewood Wood Stain with six coats of spray on lacquer
SIZE: 32" wide, 11 1/2" tall, 7" deep

Corner Hutch

by Fred Miller

PROJECT: Make a corner cabinet for storage.
DESIGN: Chippendale
MATERIAL: Primary wood is solid figured hard maple. Secondary woods are aromatic cedar for the shelves, and soft maple for the case sides and back.
FINISH: Six coats of hand-applied varnish.
SIZE: 36" wide, 78" tall, 22" deep

Music Cabinet

by  Dave Lewis

PROJECT: Music Cabinet for sheet music and books.
MATERIAL: Mahogany Finish: Urethane
SIZE: 13w x 15d x 29h
DESIGN:  Build by: Dave Lewis


by  Dave MacDonald

PROJECT: Entertainment Armoire 
PURPOSE: For personal home use 
MATERIAL: Cherry and Cherry plywood 
FINISH: Tung Oil and Wax
YEAR: 1999

Stereo Cabinet

by  Dave Lewis

99-40-dl-tn.jpg (6637 bytes)

PROJECT: Design and build a stereo component cabinet to meet customer specifications. Top to bottom, Tuner/Amp., CD Deck. CD storage, Turntable, and Tape Deck. Glass door in upper half, wood door below. Interior light comes on when upper door is opened.
MATERIALS: Birch plywood frame with Maple face frame, top     and base. FINISH: Bartley fruitwood and clear jell finish. SIZE:    60"h x 24"w x 18"d
DESIGN/BUILD BY: Dave Lewis, June, 1999


by  Don Ligon

Project: Walnut corner hutch 
Materials: Shelves and back are made of yellow pine.
Year: Completed in 1990.


by  Don Ligon

Project: Bald cypress armoir
Materials: Cedar lining in the pull drawers.
Year: Made in 1998

Display Cabinet

by Steve Hooper

Project: Display cabinet
Cabinet Grade Plywood & Oak
Paint & Shellac
Approximately 74" long x 40" High x 12" deep

Corner Cabinet

by  Dave Lewis

98-6-dl-tn.jpg (2074 bytes)

Purpose: Provide a Christmas gift for our Son and Daughter in-law.
Materials/Techniques: Hard pine face with birch plywood shelves, edged with Birch. Pine plywood backs
Finish: Satin Polyurethane
Year of construction: 1995

CD Cabinet

by  Dave Lewis

99-15-dwl-tn.jpg (2909 bytes)

Project: Design and build a storage unit to hold 550 CDs with the drawers arranged to also store videotapes. Detail to match the existing woodwork in the customers family room.
Design: To meet customer requirements.
Material: Solid birch and birch veneer.
Finish: Latex primer and finish coat.
Size: 72"l x 12"d x 36"h.