CD Cabinet

by Dave Lewis

Project: Design and build a storage unit to hold 550 CDs with the drawers arranged to also store videotapes. Detail to match the existing woodwork in the customers family room.
Design: To meet customer requirements.
Material: Solid birch and birch veneer.
Finish: Latex primer and finish coat.
Size: 72″l x 12″d x 36″h.

Music Cabinet

by Dave Lewis

PROJECT: Music Cabinet for sheet music and books.
MATERIAL: Mahogany Finish: Urethane
SIZE: 13”w x 15”d x 29”h
DESIGN: Build by: Dave Lewis

Corner Hutch

by Fred Miller

PROJECT: Make a corner cabinet for storage.
DESIGN: Chippendale
MATERIAL: Primary wood is solid figured hard maple. Secondary woods are aromatic cedar for the shelves, and soft maple for the case sides and back.
FINISH: Six coats of hand-applied varnish.
SIZE: 36″ wide, 78″ tall, 22″ deep

Wall Cabinet

by Mike Smith

PROJECT: Drop Down Storage cabinet
DESIGN: Taken from WoodSmith Magazine (Issue 169)
MATERIAL: White Pine
FINISH: Rosewood Wood Stain with six coats of spray on lacquer
SIZE: 32″ wide, 11 1/2″ tall, 7″ deep

(Image no longer available)


by Jack Stewart

PROJECT: Design and build a crib for daughter’s son born April, 17, 1999.

DESIGN: Adapted from Fine Woodworking. Design meets or exceeds Federal Specifications. Joints are mortise and tenon.

MATERIALS: Solid Cherry

FINISH: Cherry stain with three coats of Gel-Kote.

SIZE: Standard crib dimensions.

YEAR: Spring, 1999

Tissue Box

by Mike Smith

PROJECT: Tissue box – a number of these were made in 2008 as gifts for family and friends

MATERIAL: Brazilian Cherry (Jatoba)

FINISH: Oil finish

Jewelry Box

by Jeff Dieker

PROJECT: Waney Edge box made to be be given away at the annual CWA Christmas party in 2010. I got the idea from the front cover of the Woodworkers Journal (Dec 2010 Issue).

MATERIAL: Walnut & Hard Maple

FINISH: unknown
SIZE:10″ Long x 5″ Wide x 4″ Tall

Pen Display

By: Bob Meunier

PROJECT: To build a display for my fountain pen collection


FINISH: Danish Oil and wipe-on satin polyurethane
SIZE: Approximately 12″ x 4″

BUILT: June 2016

Bible Box

by Bob Meunier

PROJECT: To build a bible box for One Special Christmas auction

MATERIAL: Mahogany and Quarter Sawn Sepele; Bamboo pegs.

FINISH: Several coats of Gloss then Satin wipe-on polyurethane.
SIZE: Approximately 15″ x 10″ x 6″

BUILT: November, 2013